| To cleanse the screw heads underneath the | | | | under the chassis or on the body of the truck, |
| chassis, spray denatured alcohol on the screw | | | | try using a toothbrush to remove the dirt. It is |
| heads and then pick the dirt up with the help of a | | | | cheap, but very effective as well. A message of |
| paper clip. It is recommended to use denatured | | | | caution though, make sure not to scratch your |
| alcohol because it works a lot better than plain | | | | car paint with stiff brush bristles as this can cause |
| rubbing alcohol or motor cleaner. Compressed air | | | | scratches. |
| also works better for cleaning NTC3 after a good | | | | Occasionally your truck may not function properly. |
| day of bashing. If you need something | | | | For instance, if you turn on your truck and you |
| inexpensive, a simple piece of cloth will do the | | | | discover that it keeps steering to one side, this |
| trick for you. | | | | may be because the wheels are set at a specific |
| The soft wool or cotton wipes off the cloth will | | | | direction. A clever remedy for this situation would |
| clean the grime like magic. Nevertheless, one has | | | | be to check if your truck has a steering trim |
| to be sure not leave any loose threads going into | | | | knob, wheel or button option. Follow these simple |
| the truck. A small paint brush can also be an | | | | tips to make sure that your RC is running at |
| alternative to clean hard-to-reach areas and | | | | tiptop shape all the time and for it to run better, |
| cleanse them gently. To clean off sticky muck | | | | especially during a race. |