Stenciling Your Baby's Room

When it comes to decorating a baby's room,pottery.
every mother wants their room to be special andTo get started, simply tape the stencil on the wall
unique. No one wants their baby's room to havewith low-tack tape wherever you want it to go.
that same old cookie cutter look that you canPlace a piece of tape on each side and the top
find in any old catalog or store. Expectant momsand bottom. Once you have it in place it is time to
want to have a baby room that is one-of-a-kindget started painting. Since most stencils are about
and that they can be personally proud of. Whiletwo feet long you will want to start from the
most of us are not the best artists, one of theoutside and work your way to the middle. While
easiest ways to paint the wall with a Mexican clayyou dip your brush in the paint, make sure to
pottery design is using stencils.remember that you need less paint than you
The first step is to find the right stencil. There arethink. You don't want to glob a lot of paint on the
websites out there where you can print out freebrush only to put it to the stencil and have it run
stencils, but the best route is to go out to a storedown the wall. You should also think about
and pay money for a sturdy stencil that you don'tapplying two thin coats instead of one thick one,
have to cut out with scissors. Once you havejust like you are applying glaze for firing in your
decided what you are going to stencil on theceramic kiln.
walls, whether it be a name, flowers, tiaras, carsIf you will be stenciling on your wall many
or some sports team, you will then need to get adifferent times with the same stencil, make sure
good brush. This means that you will need ato wash it frequently. This will ensure that you
paintbrush that has short stiff bristles that youget a crisp line each time you paint, with no paint
dab into the stencil holes. You don't want a brushon the edges to cause the stencil to step away
that will slide under the edges and make yourfrom the wall. If you are using a paper stencil or
painting look lousy. A good paintbrush is good forone that cannot be washed with water, just wipe
stenciling just like kiln controllers are good for firingaway excess paint with a paper towel.