Wii Remote Troubleshooting - Steps to Fixing Wii Remote Problems

Have you been having problems with yourproblems? If the earlier steps did not get you
Wiimote? Here are some troubleshooting stepsback in the game here are some more things you
that should get you back in the game quick!can do to get back in the game fast! If your
These tips will work for all Wiimote errors. First ofWiimote is still not communicating with the Wii
all, make sure that you have properly set up yourconsole, then you need to get your Wii console to
Wii. Double check to make sure that the sensorshake hands or get "synced" with your Wiimote
bar power cord is firmly attached to the back ofagain. This can be hard if the Wiimote you are
the Wii and then chose whether you want theusing is not the original factory issue one that
sensor bar to be centered above or below yourcame with your console. The fact is if the
television screen. This is a no brainer, but I will sayWiimote was working and now it is not! Then you
it anyway: Make sure that you are using freshneed to synchronize the Wiimote to the controller
quality name brand alkaline batteries in theagain.
Wiimote. If you are using rechargeable batteriesHere are some more troubleshooting steps to
then make sure that are the new school nickelhelp you fix your Wiimote problem and get back
metal hydride and not old school cadmium.in the game:
1. Make sure that the Wiimote controller is at least1. Turn the Wii console power off. Then go to the
three to ten feet from your television set.wall and unplug the power cord from the outlet.
2. Is there anything blocking the signal the isWait about sixty seconds and then plug the
between the Wii console itself and the sensorpower cord back in the wall.
bar? If there are then move them out of the2. Turn the power back on. If you see a Health
way.and Safety screen, then look for and find the
3. What else causes sensor bar and Wiimote notsmall flap on the front of your Wii console and
to work? Interference from other things such asthen find and push a little red button that says
candles, sunlight, the glow from a fireplace as well"sync" on it. Press this button and hold it down for
as infrared signal from any number of devices.about thirty seconds. This should clear all of the
Make sure these devices are far away from thesyncs that have taken place on your Wii. It is like
Wii. Do you own a remote controlled car or plane?clearing a memory or resetting to factory
The radio frequency interference from thesedefaults if you will.
devices can interfere with proper Wiimote/sensor3. Now, after the button has been held down for
bar communication.at least thirty seconds you can now get down to
4. What other wireless toys do you have layingdoing a re-sync with your Wiimote.
around that could possibly interfere with the Wii?4. Now, take the Wiimote that you want to sync
Hows about cordless phone? A computer usingand take off the battery cover and you will find a
wireless internet or wireless input devices likelittle red button under your batteries. Press this
keyboard and mouse? Many people overlookbutton quickly and release it and you should see
these simple little things that are causing your Wiiblinking blue lights on the front of your Wiimote.
not to function properly. This is just because of a5. Go back to the console and press then sync
simple misunderstanding of what radio frequencybutton under the flap again. Then if all has worked
and infrared frequency and wirelessproperly you should see a player LED has stopped
communication can do to your home environment.blinking and this means your re-sync is done!
Now it is my hope that you understand theseThese procedures will need to be performed for
basic things so that you get hours of enjoymenteach additional Wiimote that you want to use on
from your Wii console.your system.
If after all these steps are you still having